Skip to main content

MP110 Series Hardware Manual

MP110 General Information​

MP110 Hardware Manual

GB0 Board Type Physical Interfaces​

plc-hardware-01

plc-hardware-02

GB1 Board Type Physical Interfaces​

plc-hardware-25

plc-hardware-02

General Device Specifications​

plc-hardware-03

Installation Information​

Rail Installation​

DIN Rail Mountage​

First, the upper part of the device is mounted on the DIN rail. Then, with the help of the springs behind the device, when a lightly force is applied to the lower part, the device locates into the DIN rail easily and the montage is completed.

DIN Rail Demountage​

To demount the device, firstly it is pulled from the bottom using flexibility of the spring, the device is removed from the DIN Rail and the demounting is completed.

plc-hardware-04

Expansion Installation​

The MP110 product and its extensions are mounted by sliding over the rail in such a way that the connectors correponds.

plc-hardware-05

Connection Diagrams​

Supply Connection​

plc-hardware-06

Digital Inputs​

plc-hardware-07

Digital Outputs​

plc-hardware-08

Analog Inputs​

plc-hardware-09

RS485 Serial Port​

plc-hardware-10