Skip to main content

Factory Settings

You can do factory settings of Mikrodev PLC, RTU and Gateway product families via USB connection.

  • Before starting, make sure that all USB connections to the device are closed.

  • Power OFF device, disconnect the DC supply connection.

  • Connect the USB cable between the computer and the device.

  • Power ON device, connect the DC supply.

  • Select the correct port, click "Open". Then click on "Auto Switch to Boot Prompt" and wait for the device to be rebooted and start in Boot mode.

  • After the device starts in boot mode, write "AT+DEFAULT=1" into the "Send Command" box and click "SEND" button.

  • After write "AT+DEFAULT=1" into the "Send Command", write "AT+RESET=1" into the "Send Command" box and click "SEND" button.